Rapid Imaging Solvent Management

RI 20 Recovery Unit

• The RI20 is our smallest unit
• Recycles one 55 gallon drum per week
• RI20 runs 6 gallons at a time
• Requires 2 batches a day to run a 55 gallon drum per week
• Average recycle time is 3-5 hours, start to finish
• Solvent Transfer: Auto-transfer, in and out
• Heater: Explosion-proof, Sealed, Direct Heating
• Heater: 2100 Watts
• Power Supply: 220 Volts, 20 Amp, single-phase, Air 100 psi
• Footprint: 31"x30"x45" (WDH)
• Weight: 185 LB

RI 80 Recovery Unit

• RI80 is our midsize unit
• Recycles a minimum of two 55 gallon drums per week
• Ri80 runs 20 gallons at a time
• Running one 20 gallon batch per day, equals two 55 gallon drums per week (this machine will run 3 drums per week if needed)
• Average recycle time is 5-10 hours, start to finish
• Solvent Transfer: Auto-transfer, in and out
• Heater: Explosion Proof, Sealed, Direct Heating
• Heater: 5000 Watts
• Power Supply: 220 Volts, 30 Amps, single-phase, Air 100 psi
• Footprint: 47"x27x"50" (WDH)
• Weight: 450 LB

RI 80 Continuous Feed
Requires Less User Intervention

• RI80 Continuous Feed is our largest unit
• Recycles one 55 gallon drum per day
• This unit runs continuously, automatically refills itself as needed
• Average recycle time to run one 55 gallon drum is 18-20 hours, start to finish
• Solvent Transfer: Auto-transfer, in and out
• Heater: Explosion Proof, Sealed, Direct Heating
• Heater: 5000 Watts
• Power Supply: 220 Volts, 30 Amp, single-phase, Air 100 psi
• Footprint: 47"x27"x50" (WDH)
• Weight: 460 lb
• Requires less user intervention

Work Flow for Distillation Units

A sophisticated micro-processor controls the work flow described below.

1. Used solvent is transferred to the distillation tank of the recycler.
2. Heat from the heating element vaporizes the solvent, leaving the residue in the tank for later removal.
3. Clean recycled solvent vapor cools as it flows through the air cooled condenser to the receiving container.
4. Clean recycled solvent is transferred to a drum for reuse.

Customer Advantages
for In-House Distillation

1. Units are very small
2. Extremely simple to run
3. ROI is less then one year
4. 95% reduction in drum handling, no more moving drums in and out of your facility
5. The dirty drums never moves
6. 90% recovery rate, meaning the clean drum is replaced approximately every 10 cycles.
7. No more waiting for distilled solvent
8. No more shipping costs for dirty solvent
9. Improves plate quality by running cleaner
10. Improves productivity
11. Environmentally friendly